Focus on rubber metal shock absorber parts for 15 years
| Rong induced shock absorber rubber stamping parts due to thermal expansion and contraction sake, automobile shock absorber oil seal gasket, a sealing gasket is easy to damage, the owner in the car maintenance can not be ignored. Due to the introduction of rubber shock absorber, shock absorber failure or damage, will directly affect the ride comfort and ride comfort of the car, but also affect the service life of other parts of the car. Therefore, the owner should check the shock absorber status in a timely manner whether there is oil leakage, lack of oil and other phenomena. If shock absorber no oil leakage phenomenon, should check shock absorber connecting pin, connecting rod, connecting hole, a rubber bushing etc. if there is damage, sealing off, rupture, or off the place, according to the circumstances to take repair or replacement. The inspection and maintenance of the shock absorber is also essential. When the car runs on uneven road 10? 15 km later, with the hand touch shock absorber shell, if not the potential indicates that the shock absorber may be due to lack of oil or major parts damaged, has lost the shock effect, should be removed to repair or replace the new parts. If the car in the process of moving the abnormal continuous vibration, should carefully check whether the shock absorber oil, if the oil spill should be excluded. When the rubber shock absorber is expressed in the two stage maintenance of the automobile, the working condition of the shock absorber must be checked. Check method is: the lower end of the shock absorber fixed in a vise, with hand drawing compressed several times, the normal shock absorber should have certain damping force and resistance to tensile should greater than the compression resistance. If the instability or no resistance, it may be a shock absorber oil or part of the damage, repair or replace the new parts. |
| Back |
QQ:21164273
Tel：+86-013456464687
